PRESS PLAY BUTTON
Plumbspec Mildred Valve
The Plumbspec Mildred Valve® is a watermark approved, water leak-sensing, automated shut-off valve for internal installed hot water systems.
Engineered in Australia to meet the requirements of AS/NZS 3500.4:2018 and WMTS-476:2016, the Plumbspec Mildred Valve® joins the Venlo Investment’s portfolio of plumbing product solutions.
Like all Venlo products, the Plumbspec Mildred Valve® has been designed with the user in mind, offering unique and innovative design characteristics making it simpler and faster to install. The cutaway on the valve housing allows greater accessibility for tooling and the male-to-male valve and supplied olive fittings permits the Plumber to use their own preferred choice of fitting during installation. The Plumbspec Mildred Valve® has been designed to be installed in accordance with AS/NZS 3500.4:2018.
EASY TO INSTALL. AUTOMATED SAFETY.

EASY TO INSTALL. 360° INSTALLATION.
Can be installed horizontally and vertically.

SAFETY FIRST. AUTOMATED.
Detects Hot Water System leaks and automatically shuts off inlet water supply.

AUSTRALIAN MADE. WATERMARK APPROVED.
Engineered in Australia to meet AS/NZS 3500.4:2018 and WMTS-476:2016.

AUDIBLE ALARM. VISUAL DIAGNOSIS.
Contains visual and audible alarms that alerts users to multiple trip modes.
INSTALL UP TO 600MM. NO ELECTRICIAN NEEDED.
Install up to 600mm from the Safe Tray. Battery Operated. No hard-wiring required.

Certification
SPECIFICATIONS
Scope of Use
This Mildred Valve is an electronic automated shut off valve for mains water supply systems in the event of a leak as specified below and in accordance with the requirements of the Plumbing Code of Australia (PCA) and WMTS-476:2016.
Size: 15mm (1/2”)
Type: 15mm C x C, DR Brass, Compression nut and copper olive, Full bore
Maximum operating temperature to 90°C
Maximum pressure 2500kPa
For internally installed hot water systems only
Must be installed by a licenced Plumber
Item name: Plumbspec Mildred Valve 15mm (1/2”)
Supplier code: 12020001
Part code: PS-MILDRED VALVE
Valve size: RP 15mm (1/2”)
Power source: Battery powered - 4 x AAA (supplied)
Contents
1 x Plumbspec Mildred Valve with Brass Ball Valve (BV15C)
Installation & Troubleshooting Guide
Installation Sticker
4 x AAA size batteries
2 x Copper Olives (15mm)
2 x Brass Compression Nuts (15mm C X C)
Certifications
Standard AS/NZS 3500.4.2018
WaterMark WMTS-476:2016
WaterMark Licence No. 080023
Valve and Operating Conditions
Size: 15mm (1/2”)
Type: 15mm C x C, DR Brass, Compression nut and copper olive, Full bore
Maximum operating temperature to 90°C
Maximum pressure 2500kPa.
WaterMark ATS 5200.012
WaterMark Licence No. 020042
The Plumbspec Mildred Valve device is certified for use on cold water service lines only.
Weight
0.695kg / 1.53lbs
Warranty
Venlo Investments warrants that the product will be free from defects in materials and workmanship for a period of one (1) year from the date of delivery following the original retail purchase (collectively, the “Warranty Period”). The device needs to be manually tripped and rearmed once every six months. The unit should be tripped and all batteries should be replaced every twelve months. The device should be free of water, debris, swarf and contaminates in the lines that can obstruct the valve.